In short, the more parameters, the better, which is beneficial to the selection of the pump. The pump can transport various fluid media, as well as highly viscous media, media containing solid particles, and media containing fibers. For example, ordinary medium sewage and high sludge content, the pa...

5 Check the leakage of the shaft seal. The operation of the centrifugal pump can be divided into three steps, namely start, run and stop. After the above preparations are completed, the motor can be started. 2 The bearing is filled with oil, the oil level is normal, and the oil quality is qualified....

 During the operation of the pump, impurities deposited or formed in the sealed cavity must be flushed. Now shaft seal devices generally use mechanical seals. According to statistics, the failure of the mechanical seal causes the failure of the pump to account for more than 50% of the equipment fail...

Too high temperature and pump dry ru ing are the direct factors that cause demagnetization. The thrust bearing is wo , causing the i er rotor and the isolating sleeve friction magnetic pump to not run for a long time under certain working conditions, such as evacuation, cavitation, high temperature,...

The fiber China Surface Pumps Manufacturers is related to the 'rotor' lead of each type of pump, and the allowable fiber medium viscosity is as high as 1,000,000 mpa.The speed and flow rate of vertical single screw pump are linear, and the pump can determine the speed and flow rate. According to the...

 When the medium is water or water-based liquid, the temperature rise in the a ulus area can be maintained at 3-5°C; when the medium is hydrocarbon or oil, the temperature rise in the a ulus area can be maintained at 5-8°C. Since the sliding bearing of the magnetic pump is lubricated by the conveyed...

Only after the pipe diameter increases, the water flow resistance will decrease, and the flow will increase, and the power consumption will also increase appropriately. The size of the liquid pressure is only related to the height of the head, and has nothing to do with the cross-sectional area of t...

 The pump and the motor are directly co ected coaxially, which is a mechatronics product with compact structure and stable performance. 2. The design of the anti-clogging hydraulic components of the large flow cha el greatly improves the dirt passing capacity. It can effectively pass 5 times the dia...